Fall Protection Equipment

Product type: Industrial materiallifting belt (heavyduty textile/webbing belt used for lifting loads) Brand / manufacturer: Powerlift (India) ” ISO 9001:2015 certified, "Make in India brand. Powerlift +2 Powerlift +2 Purpose: Used for lifting, hoisting or material handling “ as part of load lifting/rigging systems. Key features/specs (for typical Powerlift lifting belts): Belt material: Hightenacity polyester webbing / technical textile webbing. Powerlift +1 Width: Varies with load capacity; webbing widths can range widely (for slings: 25 mm to 300 mm) in their product range. Powerlift Safety factor: The brand lists safety factor (ratio of breaking load to working load) of approx. 4:1 to 7:1 for their flat slings/webbing product line. Powerlift Elongation (webbing): Max elongation listed 3-7% for their slings (giving an idea of stretch under load). Powerlift Standards: Manufactured to international standards “ e.g., EN 1492-1 (for webbing slings) & ASME standards. Powerlift Certification: Make in India; ISO 9001:2015 certified facility. Powerlift +1 šï Usage / Specification Notes Ensure you select the correct working load limit (WLL) for the belt “ the product description you referenced (Trade India listing) shows "Capacity 1 Ton “ 48 Ton for industrial lifting belts. TradeIndia Installation and usage must respect rated WLL, angle of lift, and correct anchorage to ensure safety. After any overload, shock loading or noticeable damage, the belt should be removed from service. Consider wear, abrasion, chemical exposure, UV, and sharp edges in your application environment “ these affect webbing belts more than metal chain slings. Summary For the Powerlift material lifting belt: Material: Hightenacity polyester technical webbing Safety factor typical: 4:1 up to 7:1 Standards: EN 1492 (for slings/webbing) & ASME Width and load capacity: Varies; can handle from 1 ton up to 48 ton capacities (depending on belt width/ply) Manufacturer/brand: Powerlift, India (ISO 9001:2015 certified)

Product type: Safety net system (horizontal or nearhorizontal net) used under working surfaces / scaffoldings to catch workers or falling objects. Purpose: To arrest or arrestcontain falls (people) or prevent debris from falling, thus providing collective fall protection. Key features/specs: Material: High strength synthetic rope or filament (polypropylene, high-tenacity polyester, etc). For example: a model uses high tenacity polypropylene, knotless weave. safetynet365.com +2 SWUK Steel Decking Supply & Install +2 Mesh size (opening): Typically maximum around 150 mm — 150 mm (‰ˆ 6 in — 6 in) for workerfall nets. For example US standard: max mesh opening not longer than 6 in (15 cm) on any side. Legal Information Institute +1 Border rope / edging rope: A strong rope/border around the net with minimum breaking strength. For example: border rope with min breaking strength 5,000 lb (22.2 kN) in U.S. regulation. osha.gov +1 Installation clearance / location: Nets should be installed as close as practicable under the walking/working surface, but not more than 9.1 m (30 ft) below in U.S. construction regulation. Legal Information Institute +1 They must extend horizontally outward from the edge of the work surface by specified distances depending on the vertical drop (e.g., up to 5 ft vertical † net edge at least 8 ft out; up to 10 ft vertical † 10 ft out; more than 10 ft vertical † 13 ft out). osha.gov +1 Breaking or performance criteria: Example specification: a net for fall arrest: mesh tensile strength 3.0 kN+; border rope tensile 30 kN. safetynet365.com Standards / Regulations: U.S.: Occupational Safety and Health Administration (OSHA) rule 1926.502(c) on safety-net systems. osha.gov British / European: e.g., standard EN 1263‘1 for fall-arrest safety nets. networldsports.in +1 Indian: e.g., standard IS 11057:1984 referenced for safety nets in India. udyogisafety.com Inspection & maintenance: Nets must be inspected for damage, wear, deterioration; debris or objects fallen into net must be removed promptly. Example: weekly inspections and after any occurrence that may affect integrity. osha.gov +1 šï Important usage / selection notes Ensure the net you select is certified to the standard relevant in your region (India, Europe, U.S.). Make sure anchorage, installation hardware, and net support structure are rated for the forces the net will absorb. After a fall is arrested by the net (or major impact), the net must be removed from service or recertified accordingly. Consider the working environment (UV exposure, chemicals, heat, weather) because nets degrade. For example, UV-stabilised materials are used for outdoor nets. safetynet365.com Choose an appropriate mesh size: for human fall prevention a smaller mesh (max 100“150 mm) is typical; bigger meshes may not safely catch a person. Install with sufficient clearance beneath the net so that when impact occurs the worker does not hit a surface below. Debris or tools falling into the net will increase the load and reduce its performance; remove them promptly.

Product type: Full-body harness for fall arrest / fall protection. Purpose: To distribute arrest forces safely around the body if a fall occurs, and to provide secure attachment points for life-lines, lanyards, anchors. Key features/specs: Webbing / Strap material: Synthetic fibres (polyester or polyamide) webbing, AZO-free dyes etc. PPE Bazar +1 Breaking strength / load rating: For example: breaking strength Webbing & materials ‰ some value such as 20-25 kN or more. sdplsafety.com +2 Adventure Gears +2 Attachment / D-rings: One dorsal D-ring (on back) for fall arrest. IIT Roorkee +1 Possibly frontal/lateral D-rings for positioning or rescue. Safety Wala +1 Straps and configuration: Shoulder straps, chest strap, thigh/leg straps (to sit-strap style) for safe distribution of forces. PPE Bazar +1 Adjustment: Adjustable shoulder, chest, and thigh/leg straps to fit different body sizes and ensure snug fit. Safety Wala +1 Standards / Certification: E.g. European standard EN 361:2002 (fall arrest harnesses) or Indian standard IS 3521 (Part 1):2021 (Fall arrest / personal fall arrest systems) are referenced. PPE Bazar +2 IIT Roorkee +2 Webbing width / thickness (for Indian standard): e.g., width minimum 40 mm and thickness minimum 3 mm (for certain harness classes) IIT Roorkee Maximum user weight / harness capacity: Many specify suitable for up to 100 kg user including tools/equipment (for Indian standard PFAS) Bureau of Indian Standards Additional features: Colour-coded or contrasting stitching for inspection. sdplsafety.com +1 Padding (optional) for comfort in prolonged use. sdplsafety.com Labels/markings for batch, date of manufacture, model, standard compliance. Adjustment buckles and hardware of alloy steel or similar high strength. Adventure Gears šï Important usage notes Make sure the harness is fitted correctly ” leg straps and chest strap must be properly adjusted. Connect to a proper anchorage point rated for fall arrest (not just positioning). After a fall that is arrested, the harness must be inspected (or removed from service) as its integrity may be compromised. Follow the manufacturer instructions and standards applicable in your region

Product type: Double-leg (twin-tail) shock-absorbing lanyard with two scaffolding hooks and one connection to the harness. Purpose: Allows continuous attachment (100% tie-off) when moving between anchor points while working at height (scaffolding, erection, maintenance). Key features/specs: Webbing / Lanyard material: Polyester or polyamide webbing rated for high breaking loads (e.g., "25 mm UV-resistant polyester webbing with minimum breaking load 2.6 tonnes). randsafety.co.za +1 Length: Undeployed typical length approx. 1.4 m“1.75 m; when shock absorber deployed up to 3.45 m. randsafety.co.za +2 Domoney Brothers +2 Hooks: Two scaffolding hooks (often large-gate, double-action or captive-eye type) rated minimum 20-23 kN. randsafety.co.za +1 One snap hook or screw-gate carabiner at lanyard/harness end (also rated 22-23 kN). Domoney Brothers +1 Shock absorber: Built-in energy absorber designed to reduce fall arrest forces (often to < 6 kN) if a fall occurs. randsafety.co.za +1 Certification / Standards: e.g., EN 354, EN 355 (Europe) or AS/NZS 1891 (Australia/NZ) etc. zeroheightsafety.com Max user/fall-arrest weight: Many specify e.g. 100 kg user rating; some go up to 140 kg. randsafety.co.za +1 Webbing width: Often e.g. 25 mm or 45 mm depending on design. Domoney Brothers +1 šï Important usage notes Make sure the scaffolding hooks and the anchorage points are rated for fall arrest (not just positioning). When one hook is un-hooked (to move to new anchor) the other hook must remain attached ” this ensures "100% tie-off. randsafety.co.za If the shock absorber has deployed (after a fall) or is damaged, the lanyard must be removed from service. Always follow manufacturer instructions and standards for your region (India: check relevant Indian Standard